Chem Link: M1-Polyether Sealant - White - 24 pcs per box

Product:

M-1 Structural Sealant and Adhesive, WHITE COLOR, 10.1 OZ/Tube.  

Ordering Notes:

• Stock Item.
• 24 Tubes/Case. Order full cases for added discounts

Description:

M-1 is a very high performance silyl-terminated, solvent free, UV resistant, moisture curing polyether (tri-polymer). M-1 is a multi-purpose structural sealant designed for the most difficult bonding and sealing applications. It bonds aggressively to EPDM, PVC, BUR, coal tar, SBS modified bitumen, granulated APP, asphalt shingles, many types of coated metal, metal flashing details and window glass. For TPO roofing, use TPO Primer together with M1 sealant.

Also excellent for underwater repairs. It can be used for emergency repairs of pools, ponds and flat roof repairs. M-1 is a non-slumping, self-fixturing mastic that cures with a tough durable rubber bond using atmospheric moisture.

M1 develops a high 45 Shore-A hardness and also excellent resistance to dirt pick-up. It is used as a security sealant in prisons, schools and public buildings, pool wall-to-deck repairs and more. It has high resistance to damage from cleaning and ease of dirt removal.

M-1 is paintable within 24 hours.

M-1 develops 380 lbs. per square inch of shear strength on metal, masonry and wood. With 290% elongation it can accommodate dimensional changes in construction materials down to minus 20 degrees F, and is solvent free.

It's a tough adhesive capable of bonding steel deck to bar joists and metal sandwich panels to roof and wall purlins.

Contains no solvents or VOC's.

Substrates/Uses:

• Concrete (fully cured / dry)
• Block, Brick, Masonry, Stone
• Metals, Aluminum, Galvanized
• EPDM, PVC, SBS modified bitumen
• Asphalt shingles, Granulated cap sheet
• TPO roofing, with use of primer
• Glass, window frames
• Wood, painted wood
• Foam, Vinyl
• Pool wall, pool tile adhesion
• Interior / Exterior
• Withstands ponding water
• TPO primer is recommended for best results in continuous immersion applications.

Installation:

Bonding surfaces must be clean and free from dirt, oil and debris. If surfaces require cleaning, wire brush or use alcohol. Do not apply less than 40F. 50F+ recommended for application and cure. See data sheet for detailed instructions.

Cure:

Cures tack free in 35-45 minutes. Cures complete in 3 to 7 days depending on temperature, humidity and thickness. Higher temperatures and moisture accelerates the curing cycle.

Limitations:

• Do not use on Kynar finished metal roofing (Use Duralink)
• Service Temperature: -40F to +200F continuous
• Less than 1/2" thickness recommended
• 1/4" and greater joint width recommended
• Do not apply over silicone sealants